K24A High Comp Forged Piston / I Section Connecting-rod KIT
K24A
Increased compression ratio and strengthened connecting-rods designed to help produce higher power outputs for tuned K24A engines. Also for tuners changing to the K24A block from the original (2 liter) block, you now have a choice of TODA head gasket to complete the swap.
Two TODA High Stopper Metal Head Gaskets have been designed one for DC5/EP3 cylinder heads and one for CL7/FD2/FN2 cylinder heads to work in conjunction with the K24A block.
*The cylinder block must be for CL9/RB1 to use with TODA head gasket.
K24A High Comp Forged Piston / I Section Connecting-rod KIT
Engine Type
K24A
Part No.
13002-K24-000
13002-K24-001
Price (set)
¥330,000
Bore×Stroke *5
ø87.00×99mm
ø87.50×99mm
Displacement
2354cc
2381cc
Crown Volume *1
6.5cc/6.5cc
Projection Height *2
±0mm
Reference C/R *3, 4, 6
K24A TODA head GK Ø88mm t=0.6mmξ≈13.1:1
K24A TODA head GK Ø88mm t=0.6mmξ≈13.2:1
Based on standard piston pin diameter.
*1:Crown volume is measured "from the piston shoulder"/"from the deck of the block".
*2:Piston shoulder height is measured from the deck of the block.
*3:The cylinder head combustion chamber volume of 51.5cc was used.
*4:The compression ratios given above are only to be taken as a guide, measurements are required.
*5:K24A standard stroke.
*6:TODA head gasket can be used only for CL9/RB1 cylinder block.
KIT Contents
1
TODA forged piston KIT (ø87.00mm/ø87.50mm)
2
I section strengthened connecting-rods (Fully floating with bush & Balanced)
K24A